4 X 6L6g RCA Tubes Black Plates Smoked Glass Very Strong Quad 1956
Item History & Price
| Reference Number: Avaluer:7117823 | Brand: RCA |
4 x 6L6g RCA Tubes*Black Plates
Made in USA
Smoked Glass
Matching Codes are 56-35 = 1956
Tested on enhanced Tripplet E3444 Laboratory Tester by Paul Hart of Roswell Ga.
5850 micromhos @ 64 mA
5800 micromhos @ 59 mA
5400 micromhos @ 58 mA
5500 micromhos @ 55 mA
Bogey(100%) = 6000 micromhos @ 72mA +/- 10%
Ask any questions before buying, not after
Th...e measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufacturers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__250_Volts plate, __250_Volts screen, ___-14.0___Volts bias or Cathode resistance*
What were your tubes tested at?
S&H to China, Italy and a few other countries will require a Tracking # and will cost a minimum of $31, depending on weight.
00104
Made in USA
Smoked Glass
Matching Codes are 56-35 = 1956
Tested on enhanced Tripplet E3444 Laboratory Tester by Paul Hart of Roswell Ga.
5850 micromhos @ 64 mA
5800 micromhos @ 59 mA
5400 micromhos @ 58 mA
5500 micromhos @ 55 mA
Bogey(100%) = 6000 micromhos @ 72mA +/- 10%
Ask any questions before buying, not after
Th...e measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufacturers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__250_Volts plate, __250_Volts screen, ___-14.0___Volts bias or Cathode resistance*
What were your tubes tested at?
S&H to China, Italy and a few other countries will require a Tracking # and will cost a minimum of $31, depending on weight.
00104
